Enclustra Mercury+ XU1 User Manual

Mercury+ XU1 SoC Module
User Manual
Purpose
The purpose of this document is to present the characteristics of Mercury+ XU1 SoC module to the user,
and to provide the user with a comprehensive guide to understanding and using the Mercury+ XU1 SoC
module.
Summary
This document first gives an overview of the Mercury+ XU1 SoC module followed by a detailed description
of its features and configuration options. In addition, references to other useful documents are included.
Product Information Code Name
Product ME-XU1 Mercury+ XU1 SoC Module
Document Information Reference Version Date
Reference / Version / Date D-0000-428-001 13 15.08.2019
Approval Information Name Position Date
Written by DIUN Design Engineer 04.05.2016
Verified by GLAC Design Expert 12.05.2016
Approved by DIUN Manager, BU SP 15.08.2019
Enclustra GmbH – Räffelstrasse 28 – CH-8045 Zürich – Switzerland
Phone +41 43 343 39 43 – www.enclustra.com

Enclustra Mercury+ XU1 Specifications

General

Brand	Enclustra
Model	Mercury+ XU1
Category	Control Unit
Language	English

Summary

Overview of Mercury+ XU1 SoC Module

Safety and Warnings

Safety, ESD, and EMC guidelines for module handling and operation.

Module Features

Detailed list of hardware specifications and capabilities of the Mercury+ XU1 SoC module.

Deliverables and Accessories

Items included with the module and available supporting resources like reference designs.

Xilinx Tool Support

Information on the required Vivado Design Edition software for MPSoC device support.

Module Description

Block Diagram

Visual representation of the Mercury+ XU1 SoC module's hardware architecture and connectivity.

Product Configuration and Codes

Explains product code structure and lists standard module configurations and their specifications.

Module Connector and Pinout

Details on physical connectors, pin assignments, and user I/O bank information.

I/O System Details

Comprehensive details on I/O banks, voltage usage, signal terminations, and pin configurations.

High-Speed Transceivers (MGT)

Description of GTH and GTR transceivers, their configurations, and capabilities for high-speed interfaces.

Power Management and Supplies

How power is generated, controlled, supplied, monitored, and safety considerations.

Memory and Storage Devices

Specifications and configurations for DDR4 SDRAM, QSPI flash, and eMMC flash memory.

Communication Interfaces

Details on Gigabit Ethernet, USB 2.0/3.0, and SD Card interfaces and their configurations.

System Clocks and Reset

Module clock resources and system reset signals (POR, SRST) for MPSoC initialization.

Device Configuration

Configuration Signals

Key signals for MPSoC configuration, including boot mode selection and flash programming.

Boot Modes

Supported boot modes (eMMC, QSPI, SD Card, JTAG) and their configuration requirements.

JTAG and Debugging

Using JTAG for PL/PS access, debugging, and programming via module connector or debug connector.

Flash Programming Methods

Methods for programming eMMC and QSPI flash memory using various interfaces and tools.

I2C Communication

I2C Interface Overview

Details on the I2C bus connection, speed limits, and signal descriptions.

EEPROM Configuration and Memory Map

Information on the secure EEPROM, its memory map, and storage of module configuration data.

Operating Conditions

Absolute Maximum Ratings

Specifies the extreme voltage and temperature limits for the module to prevent damage.

Recommended Operating Conditions

Outlines the voltage and temperature ranges for safe and reliable operation of the module.

Ordering and Support

Ordering Information

Instructions for ordering the module and requesting product information from Enclustra.

Technical Support

Guidance on how to access technical support resources and assistance from Enclustra.