Deltabar S
Endress+Hauser 31
Process connections PMD70
with ceramic process isolating
diaphragms
Note!
Some device versions have CRN approval. For a CRN-approved device, a CRN-approved process connection
( ä 68, feature 70 "Process connection") has to be ordered with a CSA approval ( ä 67, feature 10
"Approval"). These devices are fitted with a separate plate bearing the registration number 0F10524.5C.
P01-PMD70xxx-06-09-xx-xx-000
Process connection PMD70, oval flange
H Device height see ä 32, section "Device height H"
41.3
54
84
96
108
M10
7/16-20 UNF
RC1/4
1/4-18 NPT
H
+
–
+
+
–
Ver-
sion
Connection Mounting Material Accessories Weight
1
1) Process connection weight, for housing weight see ä 51
B 1/4-18 NPT IEC 61518 7/16-20 UNF Steel C 22.8 2 vent valves (AISI 316L/1.4404)
included
4.0 kg
D 1/4-18 NPT IEC 61518 7/16-20 UNF AISI 316L
2
2) AISI 316L/1.4435
4.0 kg
F 1/4-18 NPT IEC 61518 7/16-20 UNF Alloy C276
3
3) Alloy C276/2.4819
Vent valves (Alloy C276/2.4819),
see ä 68 feature 110
"Additional options 2".
4.2 kg
U RC 1/4 7/16-20 UNF AISI 316L
2
2 vent valves (AISI 316L/1.4404)
included
4.0 kg
1 1/4-18 NPT IEC 61518 PN 160: M10 Steel C 22.8 4.0 kg
2 1/4-18 NPT IEC 61518 PN 160: M10 AISI 316L
2
4.0 kg
3 1/4-18 NPT IEC 61518 PN 160: M10 Alloy C276
3
Vent valves (Alloy C276/2.4819),
see ä 68, feature 110
"Additional options 2".
4.2 kg
To Next Page
Loading...
