Endress+Hauser Deltabar S PMD75 - Process Connection FMD78 with Metallic Measuring Diaphragms (Continued)

Deltabar S
Endress+Hauser 47
Process connection FMD78
with metallic measuring
diaphragms (continued)
Taper adapter with coupling nut, DIN 11851 (dairy fitting)
P01-FMD78xxx-06-09-xx-xx-007
Process connection FMD78, material AISI 316L, surface roughness of the wetted surfaces  0.8 m as standard. Lower
surface roughness on request.
Threaded adapter, DIN 11851 (dairy fitting)
P01-FMD78xxx-06-09-xx-xx-008
Process connection FMD78, material AISI 316L, surface roughness of the wetted surfaces  0.8 m as standard. Lower
surface roughness on request.
D
G
40
f
k
m
d
M
Taper adapter Slotted nut Diaphragm seal
Ver-
sion
Nominal
diameter
Nominal
pressure
Diameter Adapter
height
Thread Height Height max.
Diaphragm
diameter
T
K
Process Weight of
two
diaphragm
seals
Df G kmd
M
[mm] [mm] [mm] [mm] [mm] [mbar/10 K] [kg]
MR DN 50 PN 25 68.5 11 Rd 78 x 1/6" 22 19 52 +0.90 2.2
MS DN 65 PN 25 86 12 Rd 95 x 1/6" 25 21 66 +0.29 4.0
MT DN 80 PN 25 100 12 Rd 110 x 1/4" 30 26 81 +0.30 5.1
d
M
d
1
G
h
Threaded adapter Diaphragm seal
Version Nominal
diameter
Nominal
pressure
Diameter Height Thread max.
Diaphragm
diameter
T
K
Process Weight of two
diaphragm
seals
d
1
hGd
M
[mm] [mm] [mm] [mbar/10 K] [kg]
M3 DN 50 PN 25 54 35 Rd 78 x 1/6" 52 +0.95 1.8
M4 DN 65 PN 25 71 40 Rd 95 x 1/6" 66 +0.29 3.4
M5 DN 80 PN 25 85 40 Rd 110 x 1/4" 81 +0.19 4.0