Endress+Hauser Deltabar S PMD75 - Hard- und Software for On-Site and Remote Operation

Deltabar S
56 Endress+Hauser
– Display DD menus
– Download a configuration
– Verify a configuration and compare it to a saved configuration
– Monitor a downloaded configuration
– Replace a virtual device by a real device
– Save and print a configuration
Note!
For further information please contact your local Endress+Hauser Sales Center.
Hard- und Software for on-site
and remote operation
Commubox FXA191
For intrinsically safe communication with FieldCare via the RS232C interface. For details refer to
TI237F700/en.
Commubox FXA195
For intrinsically safe communication with FieldCare via the USB interface. For details refer to TI404F/00/en.
Commubox FXA291
The Commubox FXA291 connects Endress+Hauser field instruent with CDI interface (=Endress+Hauser
Common Data Interface) to the USB interface of a personal computer or a notebook. For details refer to
TI405C/07/en.
Note!
For the following Endress+Hauser instruments you need the "ToF Adapter FXA291" as an additional accessory:
• Cerabar S PMC71, PMP7x
• Deltabar S PMD7x, FMD7x
• Deltapilot S FMB70
ToF Adapter FXA291
The ToF Adapter FXA291 connects the Commubox FXA291 with instruments of the ToF platform, pressure
instruments and Gammapilot via the USB interface of a personal computer or a notebook. For details refer to
KA271F.
Field Communicator 375
With a handheld terminal, all the parameters can be configured anywhere along the 4 to 20 mA line via menu
operation.