Deltabar S
78 Endress+Hauser
FMD77 (continued)
90 Fill fluid:
A Silicone oil
D Vegetable oil
L Low temperature oil
V High-temperature oil
FInert oil
100 Additional options 1:
A Additional options 1 not selected
B Material test certificate for wetted components, inspection certificate as per
EN 10204 3.1 acc. to specification 52005759
C NACE MR0175 material
D Material test certificate for wetted components as per EN 10204 3.1 and
NACE MR0175 material, inspection certificate as per EN 10204 acc. to
specification 52010806
M Overvoltage protection
J Software adjustment, see additional spec.
N HistoROM module
2 Test report acc. to EN 10204 2.2
3 Routine test with certificate, inspection certificate as per EN 10204 3.1
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1
110 Additional options 2:
A Additional options 2 not selected
E SIL/IEC 61508 declaration of conformity
G Separate housing, cable length see additional spec. + mounting
bracket, wall/pipe, 316L
(FM/CSA IS: nur für Div.1 Installation)
M Overvoltage protection
J Software adjustment, see additional spec.
N HistoROM module
R Screws 7/16 UNF, length 1 1/2" (4 pieces) for oval flange adapter
PZO
2 Test report acc. to EN 10204 2.2
3 Routine test with certificate,
inspection certificate as per EN 10204 3.1
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1
995 Identification:
Z1 Measuring point (TAG)
Z2 Bus address
FMD77 order code
To Next Page
Loading...
