Endress+Hauser Deltabar S PMD75 - Process Connection FMD78 with Metallic Measuring Diaphragms (Continued)

Deltabar S
46 Endress+Hauser
Process connection FMD78
with metallic measuring
diaphragms (continued)
DRD DN50 (65 mm)
P01-FM78xxx-06-09-xx-xx-002
Process connection FMD78, surface roughness of the wetted surfaces  0.8 m as standard. Lower surface roughness on
request.
Hygienic connection, sanitary tank spud, extended diaphragm seal 2"
P01-FMD78xxx-06-09-xx-xx-011
Process connection FMD78, surface roughness of the wetted surfaces  0.8 m as standard. Lower surface roughness on
request.
4xø11.5
ø65
–1.2
ø84
ø105
d =50
M max.
23.6
41
Version Material Nominal pressure T
K
Process Weight of two
diaphragm seals
[mbar/10 K] [kg]
TK AISI 316L PN 25 +1.25 1.5
53.5
ø91.45
ø100
ø132.7
Version Material T
K
Process Weight of two
diaphragm seals
[mbar/10 K] [kg]
WH AISI 316L +1.64 5