Endress+Hauser Deltabar S PMD75 - Flow Measurement (FF Configuration Program); Calibration

Deltabar S
34 Endress+Hauser
Process connections PMD75
with metallic process isolating
diaphragms (continued)
Oval flange, connection 1/4-18 NPT or RC 1/4, with side vent
P01-PMD75xxx-06-09-xx-xx-004
Process connection PMD75, 10 mbar and 30 mbar measuring cell
P01-PMD75xxx-06-09-xx-xx-003
Process connection PMD75, nominal value 100 mbar
H Device height see  ä 35, section "Device height H"
106
41.3
+
–
85
42
H
54
85
100
7/16-20 UNF
RC1/4
1/4-18 NPT
1/4-18 NPT
+
–
H
7/16-20 UNF
RC1/4
1/4-18 NPT
1/4-18 NPT
+
–
100
72
98
41.3
28
54
87
+
–
Ver-
sion
Connection Mounting Material Accessories Weight
1
1) Weight of process connections without vent valves with 10 mbar or 30 mbar sensors, process connections without
vent valves with sensors  100 mbar weght approx. 800 g less. Housing weight see  ä 51
C 1/4-18 NPT IEC 61518 7/16-20 UNF Steel C 22.8 4 locking screws and
2 vent valves included
(AISI 316L/1.4404)
4.2 kg
E 1/4-18 NPT IEC 61518 7/16-20 UNF AISI 316L
2
2) PN 160 bar measuring cells: AISI 316L/1.4435, PN 420 bar measuring cells: AISI 316L/1.4435 or 1.4404
4.2 kg
H 1/4-18 NPT IEC 61518 7/16-20 UNF Alloy C276
3
3) Alloy C276/2.4819
Vent valves (Alloy C276/2.4819),
see  ä 72, feature 110
"Additional options 2".
4.5 kg
V RC 1/4 7/16-20 UNF AISI 316L
2
4 looking screws and
2 vent valves included
(AISI 316L/1.4404)
4.2 kg