Endress+Hauser Deltabar S PMD75 - Separate Housing Version

Deltabar S
50 Endress+Hauser
"Separate housing" version
P01-xxxxxxxx-06-xx-xx-xx-000
Dimensions T14 housing, optional display on the side. Housing weight see  ä 51.
P01-xxxxxxxx-06-xx-xx-xx-001
Dimensions T17 housing, optional display on the side. Housing weight see  ä 51.
P01-xxxxxxxx-06-xx-xx-xx-002
Reduction of the mounting height of the process connection, for application of the separate housing.
1 Process connection adapter.
If the separate housing is used, the mounting height of the process connection is reduced by approx. 45 mm
as compared to the dimensions of the standard version.
The minimum bending radius (r) for the cable is 120 mm (4.7").
45.5
ø51.7
101
84
131
118
45.5
ø51.7
101
76
147
118
+
–
+
–
+
–
+
–
+
–
ø54.1
45
45
81
T14
T17
➀
r ³ 120 mmr ³ 120 mm
➀
r ³ 120 mmr ³ 120 mm
➀
r ³ 120 mmr ³ 120 mm