Deltabar S
Endress+Hauser 81
FMD78 (continued)
80 Process connection, Material:
ANSI flanges
AF 2" 150 lbs RF, AISI 316/316L (CRN)
AR 2" 300 lbs RF, AISI 316/316L (CRN)
AG 3" 150 lbs RF, AISI 316/16L (CRN)
AS 3" 300 lbs RF, AISI 316/316L (CRN)
J4 3" 150 lbs RF, AISI 316/316L, extended diaphragm seal: 2"/4"/6"/8" (CRN),
extended diaphragm seal: see additional specification
AH 4" 150 lbs RF, AISI 316/316L (CRN)
AT 4" 300 lbs RF, AISI 316/316L (CRN)
J5 4" 150 lbs RF, AISI 316/316L, extended diaphragm seal: 2"/4"/6"/8" (CRN),
extended diaphragm seal: see additional specification
JIS flanges
KF 10K 50A RF, AISI 316L
KL 10K 80A RF, AISI 316L
KH 10K 100A RF, AISI 316L
90 Capillary, Fill fluid:
1 ...m capillary, silicone oil
2 ...m capillary, vegetable oil
3 ...m capillary, high temperature oil
4 ...m capillary, oil for oxygen service
5 ...m capillary, low temperature oil
A ...ft capillary, silicone oil
B ...ft capillary, vegetable oil
C ...ft capillary, high temperature oil
D ...ft capillary, oil for oxygen service
E ...ft capillary, low temperature oil
100 Additional options 1:
A Additional options 1 not selected
B Material test certificate for wetted components, inspection certificate as per
EN 10204 acc. to specification 52005759
C NACE MR0175 material
D Material test certificate for wetted components as per EN 10204 3.1 and
NACE MR0175 material, inspection certificate as per EN 10204 acc. to
specification 52010806
M Overvoltage protection
J Software adjustment, see additional spec.
N HistoROM module
S GL/ABS marine certificate
U Mounting bracket, wall/pipe, 304
2 Test report acc. to EN 10204 2.2
3 Routine test with certificate, inspection certificate as per EN 10204 3.1
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1
110 Additional options 2:
A Additional options 2 not selected
E SIL/IEC61508 Declaration of conformity
G Separate housing, cable length see additional spec. + mounting bracket,
wall/pipe, 316L
(FM/CSA IS: nur für Div.1 Installation)
M Overvoltage protection
J Software adjustment, see additional spec.
N HistoROM module
R 4x srew UNF7/16, length 1-1/2"
S GL/ABS marine certificate
U Mounting bracket for wall and pipe, AISI 304
2 Test report acc. to EN 10204 2.2
3 Routine test with certificate, inspection certificate as per EN 10204 3.1
4 Overpressure test with certificate,
inspection certificate as per EN 10204 3.1
995 Identification:
Z1 Measuring point (TAG)
Z2 Bus address
FMD78 order code
To Next Page
Loading...
