Endress+Hauser Deltabar S PMD75 - Diaphragms (Continued)

Deltabar S
Endress+Hauser 35
Process connections PMD75
with metallic process isolating
diaphragms (continued)
Oval flange, prepared for diaphragm seal mount
P01-PMD75xxx-06-09-xx-xx-002
Left: Process connection PMD75, version W, prepared for diaphragm seal mount
Right: Position of the copper ring seal
H Device height see the following section "Device height H"
1 Diaphragm seal attachment
2 Copper ring seal
3 Process isolating diaphragm
Device height H
➁
H
7/16-20 UNF
M6
+
–
+
–
72
41.3
98
54 54
87
➀
➂
Description Device height H
1
1) Values for devices with 10 mbar and 30 mbar measuring cell in brackets
T14 housing, optional display on the side 217 mm (230 mm)
T15 housing without display, flat cover 223 mm (236 mm)
T15 housing with display, high cover 235.5 mm (248.5 mm)
T17 housing, optional display on the side 233 mm (246 mm)