Endress+Hauser Deltabar S PMD75 - Parameter Description (FF Configuration Program); Block Models: Cerabar S;Deltabar S;Deltapilot S

Deltabar S
38 Endress+Hauser
Process connection FMD76
with ceramic process isolating
diaphragms (continued)
Device height H, devices with flange
Process connections FMD77
with metallic process isolating
diaphragms, low-pressure
side
P01-FMD77xxx-06-xx-xx-xx-001
Low-pressure side: connection 1/4-18 NPT, mounting optionally 7/16-20 UNF,
Side flanges material of the basic device: AISI 316L/1.4435 or 1.4404
high-pressure side, see the following section "Process connections, high-pressure side FMD77"
Description Device height H (h + b)
T14 housing, optional display on the side 175 mm + flange thickness b (see tables)
T15 housing without display, flat cover 181 mm + flange thickness b (see tables)
T15 housing with display, high cover 193.5 mm + flange thickness b (see tables)
T17 housing, optional display on the side 191 mm + flange thickness b (see tables)
150
103.7
+
–
41.3
7/16-20 UNF
1/4-18 NPT
100
+
–