Endress+Hauser Deltabar S PMD75 - Process Connections PMD75 with Metallic Process Isolating Diaphragms

Deltabar S
Endress+Hauser 33
Process connections PMD75
with metallic process isolating
diaphragms
Note!
Some device versions have CRN approval. For a CRN-approved device, a CRN-approved process connection
( ä 71, feature 70 "Process connection") has to be ordered with a CSA approval ( ä 68, feature 10
"Approval"). These devices are fitted with a separate plate bearing the registration number 0F10524.5C.
Oval flange, connection 1/4-18 NPT or RC 1/4
P01-PMD75xxx-06-09-xx-xx-005
Process connection PMD75,
above 10 mbar and 30 mbar measuring cell; below: Measuring cell 100 mbar
H Device height see  ä 35, section "Device height H"
H
7/16-20 UNF
RC1/4
1/4-18 NPT
+
–
100
72
98
41.3
54
M10 (M12)
87
106
M 10
41.3
+
–
85
H
54
85
100
7/16-20 UNF
RC1/4
1/4-18 NPT
+
–
+
–
Ver-
sion
Connection Mounting Material Accessories Weight
1
1) Weight of process connections without vent valves with 10 mbar or 30 mbar sensors, process connections without
vent valves with sensors  100 mbar weght approx. 800 g less. Housing weight see  ä 51.
B 1/4-18 NPT IEC 61518 7/16-20 UNF Steel C 22.8 2 vent valves (AISI 316L/1.4404)
included
4.2 kg
D 1/4-18 NPT IEC 61518 7/16-20 UNF AISI 316L
2
2) AISI 316L/1.4435 or 1.4404
4.2 kg
F 1/4-18 NPT IEC 61518 7/16-20 UNF Alloy C276
3
3) Alloy C276/2.4819
Vent valves (Alloy C276/2.4819),
see  ä 72, feature 110
"Additional options 2".
4.5 kg
U RC 1/4 7/16-20 UNF AISI 316L
2
2 vent valves (AISI 316L/1.4404)
included
4.2kg
1 1/4-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
Steel C 22.8 4.2 kg
2 1/4-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
AISI 316L
2
4.2 kg
3 1/4-18 NPT IEC 61518 – PN 160: M10
– PN 420: M12
Alloy C276
3
Vent valves (Alloy C276/2.4819),
see  ä 72 ff, feature 110
"Additional options 2".
4.5 kg