Endress+Hauser Deltabar S PMD75 - Page 61

Deltabar S
Endress+Hauser 61
P01-FMD78xxx-05-xx-xx-en-005
Characteristic
type
Version Diaphragm seal
1 TF Tri-Clamp, ISO 2852 DN 76.1 (3"), AISI 316L/1.4435
2 GA Thread ISO 228 G 1/2 B, PN 40, AISI 316L, Separator, PTFE seal
RL Thread ANSI 1/2 FNPT, PN 40, AISI 316L, Separator, PTFE seal
UH Cell DN 80 PN 16-400, AISI 316L
UJ Cell DN 100 PN 16-400, AISI 316L
VH Cell 3" 150-2500 lbs, AISI 316L
VJ Cell 4" 150-2500 lbs, AISI 316L
B5 EN/DIN flange DN 80 PN 10-40 B1, AISI 316L
BT EN/DIN flange DN 100 PN 10-16 B1, AISI 316L
B6 EN/DIN flange DN 100 PN 25-40 B1, AISI 316L
AG ANSI flange 3" 150 lbs RF, AISI 316/316L
AS ANSI flange 3" 300 lbs RF, AISI 316/316L
AH ANSI flange 4" 150 lbs RF, AISI 316/316L
J5 ANSI flange 4" 150 lbs RF, AISI 316/316L, Extensions: 2"/4"/6"/8"
AT ANSI flange 4" 300 lbs RF, AISI 316/316L
KL JIS flange 80 A 10 K RF, AISI 316L
KH JIS flange 100 A 10 K RF, AISI 316L
MT DIN 11851 DN 80 PN 25, AISI 316L
M5 DIN 11851 DN 80 PN 25 socket, AISI 316L
3 MS DIN 11851 DN 65 PN 25, AISI 316L
M4 DIN 11851 DN 65 PN 25 socket, AISI 316L
J4 ANSI flange 3" 150 lbs RF, AISI 316/316L, Extensions: 2"/4"/6"/8"
4 SC Pipe seal diaphragm Tri Clamp, ISO 2852 DN 38 (1 1/2"), AISI 316L/1.4435
SD Pipe seal diaphragm Tri Clamp, ISO 2852 DN 51 (2"), AISI 316L/1.4435
5 UF Cell DN 50 PN 16-400, AISI 316L
VF Cell 2" 150-2500 lbs, AISI 316L
B3 EN/DIN flange DN 50 PN 10-40 B1, AISI 316L
AF ANSI flange 2" 150 lbs RF, AISI 316/316L
AR ANSI flange 2" 300 lbs RF, AISI 316/316L
KF JIS flange 50 A 10 K RF, AISI 316L
MR DIN 11851 DN 50 PN 25, AISI 316L
M3 DIN 11851 DN 50 PN 25 socket, AISI 316L
6 TD Tri-Clamp, ISO 2852 DN 51 (2"), DIN 32676 DN 50, AISI 316L/1.4435
7 TK DRD DN50 (65 mm), PN 25, AISI 316L/1.4435
TR Varivent Type N for tubes DN 40 – DN 162, PN 40, AISI 316L/1.4435
9
10
11
012345678910
0
10
20
30
40
50
60
70
80
90
8
T Ambient
K
[mbar/10 K]
[m]
Capillary length