Ecograph T, RSG35 Appendix
Endress+Hauser 153
Event text LV off
Navigation Expert → Application → Limits → Limit x → Event text LV off
Direct access code: 450010-0xx
Examples: Set point 1: 450010-000; Set point 30: 450010-029
Description The same as "Event text LV on", but on return from alarm to normal condition.
User entry Text (max. 22 characters)
Record duration of LV on
Navigation Expert → Application → Limits → Limit x → Record duration of LV on
Direct access code: 450011-0xx
Examples: Set point 1: 450011-000; Set point 30: 450011-029
Description The duration of a set point violation can be recorded. The duration is appended to the
"limit value off" event text (format: <hhhh>h<mm>:<ss>).
Power failure times do not affect the duration. If the set point was violated before the
power failure and is still violated after the power failure, the duration continues.
Options No, Yes
Factory setting No
Save cycle
Navigation Expert → Application → Limits → Limit x → Save cycle
Direct access code: 450012-0xx
Examples: Set point 1: 450012-000; Set point 30: 450012-029
Description Normal: Save in normal store cycle.
Alarm cycle: Fast storage during an alarm violation, e.g. every second. Attention: Requires
higher memory capacity.
• The save cycle is set under signal groups .→ 155
• In the event of an alarm violation, all the groups are saved in the alarm cycle.
Options Normal, Alarm cycle
Factory setting Normal
Draw help line
To Next Page
Loading...