iTEMP TMT82 Operating menu and parameter description
Endress+Hauser 101
13.3.3 "Output" submenu
Measuring mode
Navigation Expert → Output → Measuring mode
Description Enables the inversion of the output signal.
Additional information • Standard
The output current increases with increasing temperatures
• inverted
The output current decreases with increasing temperatures
Options • Standard
• inverted
Factory setting Standard
13.3.4 "Communication" submenu
"HART configuration" submenu
Device tag → 88
Navigation Diagnostics → Device information → Device tag
Expert → Communication → HART configuration → Device tag
HART short tag
Navigation Expert → Communication → HART configuration → HART short tag
Description Use this function to define a short tag for the measuring point.
User entry Up to 8 alphanumeric characters (letters, numbers and special characters)
Factory setting SHORTTAG
HART address
Navigation Expert → Communication → HART configuration → HART address
Description Use this function to define the HART address of the device.
To Next Page
Loading...
