iTEMP TMT82 Operating menu and parameter description
Endress+Hauser 103
Factory setting 0xcc
Device revision
Navigation Expert → Communication → HART info → Device revision
Description Use this function to view the device revision with which the device is registered with the
HART
®
FieldComm Group. It is needed to assign the appropriate device description file
(DD) to the device.
Factory setting 2
Manufacturer ID
Navigation Expert → Communication → HART info → Manufacturer ID
Expert → Diagnostics → Device information → Manufacturer ID
Description Use this function to view the manufacturer ID under which the device is registered with
the HART FieldComm Group.
Display 2-digit hexadecimal number
Factory setting 17
HART revision
Navigation Expert → Communication → HART info → HART revision
Description Use this function to display the HART revision of the device.
HART descriptor
Navigation Expert → Communication → HART info → HART descriptor
Description Use this function to define a description for the measuring point.
User entry Up to 32 alphanumeric characters (letters, numbers and special characters)
Factory setting The device name
To Next Page
Loading...
