Endress+Hauser iTEMP TMT82 - Page 106

Operating menu and parameter description iTEMP TMT82
106 Endress+Hauser
Assign TV
Navigation Expert → Communication → HART output → Assign TV
Description Use this function to assign a measured variable to the tertiary HART value (TV).
Options See Assign current output (PV) parameter, →  104
Factory setting Sensor 1
TV
Navigation Expert → Communication → HART output→ TV
Description Use this function to display the tertiary HART value
Assign QV
Navigation Expert→ Communication → HART output → Assign QV
Description Use this function to assign a measured variable to the quaternary (fourth) HART value
(QV).
Options See Assign current output (PV) parameter, →  104
Factory setting Sensor 1
QV
Navigation Expert → Communication → HART output→ QV
Description Use this function to display the quaternary HART value
"Burst configuration" submenu
Up to 3 burst modes can be configured.
Burst mode