Endress+Hauser iTEMP TMT82 - Page 91

iTEMP TMT82 Operating menu and parameter description
Endress+Hauser 91
Sensor n max value
n = Stands for the number of sensor inputs (1 and 2)
Navigation Diagnostics → Measured values → Min/max values → Sensor n max value
Expert → Diagnostics → Measured values → Min/max values → Sensor n max. value
Description Use this function to display the maximum temperature measured in the past at sensor
input 1 or 2 (peakhold indicator).
Reset sensor min/max values
Navigation Diagnostics → Measured values → Min/max values → Reset sensor min/max values
Expert → Diagnostics → Measured values → Min/max values → Reset sensor
min/max values
Description Reset the peakhold indicators for the minimum and maximum temperatures measured at
the sensor inputs.
Options • No
• Yes
Factory setting No
Device temperature min.
Navigation Diagnostics → Measured values → Min/max values → Device temperature min.
Expert → Diagnostics → Measured values → Min/max values → Device temperature
min.
Description Use this function to display the minimum electronics temperature measured in the past
(peakhold indicator).
Device temperature max.
Navigation Diagnostics → Measured values → Min/max values → Device temperature max.
Expert → Diagnostics → Measured values → Min/max values → Device temperature
max.
Description Use this function to display the maximum electronics temperature measured in the past
(peakhold indicator).