EasyManua.ls Logo

Endress+Hauser Liquiphant FTL62 - Cable Entries and Device Plugs; Ensuring Degree of Protection

Endress+Hauser Liquiphant FTL62
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical connection Liquiphant FTL62 HART
24 Endress+Hauser
6.3.8 Cable entries
1
2
A0045831
1 Cable entry
2 Dummy plug
The type of cable entry depends on the device version ordered.
6.3.9 Available device plugs
In the case of devices with a plug, it is not necessary to open the housing for
connection purposes.
M12 plug
2
1
34
A0011175
 19 M12 plug, pin assignment
1 Signal +
2 Not assigned
3 Signal –
4 Ground
A
 For more details, see the "Accessories" section.
6.4 Ensuring the degree of protection
6.4.1 Degree of protection
In accordance with DIN EN 60529, NEMA 250
IP66/IP68 NEMA 4X/6P (1.83 m H
2
O for 24 h)
Types of housing:
Single compartment; aluminum, coated; Ex d/XP
Dual-compartment, L-shape; aluminum, 316L; Ex d/XP
Degree of protection for M12 plug
When housing is closed and connecting cable is plugged in: IP66/67 NEMA Type 4X
When housing is open or connecting cable is not plugged in: IP20, NEMA Type 1

Table of Contents

Other manuals for Endress+Hauser Liquiphant FTL62

Related product manuals