Liquiphant FTL62 HART Accessories
Endress+Hauser 49
13.3.1 HistoROM
It is not necessary to perform a new device calibration after replacing the display or
transmitter electronics.
The spare part is supplied without HistoROM.
After removing the transmitter electronics, remove HistoRom and insert it into the
new spare part.
13.4 Return
The device must be returned if the wrong device has been ordered or delivered. As an ISO-
certified company and also due to legal regulations, Endress+Hauser is obliged to follow
certain procedures when handling any returned products that have been in contact with
medium. Ensure swift, safe and professional device returns: please read the return
procedures and conditions on the Endress+Hauser website
http://www.endress.com/support/return-material
13.5 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to Endress+Hauser for
disposal under the applicable conditions.
14 Accessories
14.1 Device Viewer
All the spare parts for the device, along with the order code, are listed in the Device Viewer
(www.endress.com/deviceviewer).
14.2 Weather protection cover for dual compartment
housing
• Material: stainless steel 316L
• Order number: 71438303
To Next Page
Loading...
