Endress+Hauser Liquiphant FTL62 - Establishing Connections for Configuration; Configuring Device Address and Language

Commissioning Liquiphant FTL62 HART
32 Endress+Hauser
9.4 Establishing a connection via FieldCare and
DeviceCare
9.4.1 Via HART protocol
1 4 5 7
9
6 8
2
3
A0046562
 23 Options for remote operation via HART protocol
1 PLC (programmable logic controller)
2 Transmitter power supply unit, e.g. RN221N (with communication resistor)
3 Connection for Commubox FXA195 and Field Communicator 375, 475
4 Handheld terminal
5 Computer with operating tool (e.g. FieldCare/DeviceCare, AMS Device Manager, SIMATIC PDM)
6 Commubox FXA195 (USB)
7 Field Xpert SMT70
8 VIATOR Bluetooth modem with connecting cable
9 Device
9.4.2 FieldCare/DeviceCare via service interface (CDI)
1 2 3
A0039148
1 Computer with FieldCare/DeviceCare operating tool
2 Commubox FXA291
3 Service interface (CDI) of the device (= Endress+Hauser Common Data Interface)
At least 22 mA is required to update (flash) the device firmware.
9.5 Configuring the device address via software
See HART address parameter.
Navigation: Application → HART output → Configuration → HART address