Operation Liquistation CSF48
124 Endress+Hauser
Multiple date
Repetition mode Options
• Daily interval
•Weekly interval
•Days of week
Factory setting
Daily interval
Daily interval:
Specify whether the subprogram should be repeated
every day.
Weekly interval:
Specify whether the subprogram should be repeated
every week.
Days of week:
Specify whether the subprogram should be repeated
on certain days of the week.
--> Select the days of the week in the subsequent
menu item.
Repetition interval
(only for Daily interval
and Weekly interval)
1 to 999
Factory setting
1
Specify for how many days or weeks the subprogram
should be active.
Example:
Repetition mode = daily interval
Repetition interval = 2
The subprogram is enabled every second day from the
start condition.
If Enable subprogram Interval is selected:
Start condition Options
•No delay
• Date/Time
•Time
Factory setting
Date/Time
No delay:
The subprogram is started when the program is
enabled.
Date/Time:
Set the start date and start time for enabling the
subprogram.
Time:
Set the start time for enabling the subprogram.
Start date 01.01.2000 to 31.12.2099
Factory setting
DD.MM.YYYY
Set the start date for the 1st interval. The format
depends on the option configured under general
settings.
Start time 00:00:00 to 23:59:59
Factory setting
HH:MM:SS (24h)
Set the time for the 1st interval. The format depends
on the option configured under general settings.
Activity time 00-00:01 to 31-00:00
DD-HH:MM
Factory setting
00-00:01 DD-HH:MM
Specify how long the subprogram should be active in
days, hours and minutes. The subprogram always
begins with an activation.
Inactivity time 00-00:01 to 31-00:00
DD-HH:MM
Factory setting
00-00:01 DD-HH:MM
Specify how long the subprogram should be inactive
in days, hours and minutes.
Path: Menu/Setup/Sampling programs
Function Options Info
To Next Page
Loading...
