Operation Liquistation CSF48
126 Endress+Hauser
Bottle assignment
(only possible with multiple
bottles)
This menu item appears when
more than one bottle is
available, regardless of the
number of subprograms.
Options
• No bottle assignment
• Dynamical bottle
assignment
• Statical bottle assignment
Factory setting
Dynamical bottle assignment
No bottle assignment:
Each subprogram fills the same bottle until the bottle
is full. All the subprograms then change to the next
bottle.
Only visible if there is more than one subprogram.
Dynamical bottle assignment:
When the subprogram changes, the system switches
to the next empty bottle.
Statical bottle assignment:
A table can be used to assign a subprogram to each
bottle.
Via the "Bottle change" menu item, the bottle change can be configured after a certain time or number of samples if
bottle distribution with more than one bottle has been selected and either dynamic or static bottle assignment has been
selected.
If Bottle assignment Statical bottle assignment is selected:
Bottle assignment table
Select a bottle and assign it a subprogram.
Path: Menu/Setup/Sampling programs
Function Options Info
To Next Page
Loading...
