Endress+Hauser Liquistation CSF48 - Page 131

Liquistation CSF48 Operation
Endress+Hauser 131
If Start condition Volume is selected:
Start volume input Options
• No flow input configured
• Binary input S:x
• Current input S:x
Factory setting
No flow input configured
Select the start volume input.
The binary input or the current input must be
configured for this function.
Only the inputs configured for flow measurement are
displayed.
Start flow sum 1.000 to 9999.000 m³
Factory setting
10,000 m³
Set the start volume.
If Start condition External start is selected:
Start signal input Options
• No program start input
configured
• Binary input S:x
Factory setting
No program start input
configured
Select the program start input.
The binary input must be configured for this function.
Only the inputs configured as a program start input
are displayed.
If Start condition External duration is selected:
Start signal input Options
• No program duration input
configured
• Binary input S:x
Factory setting
No program duration input
configured
Select the program duration input.
The binary input must be configured for this function.
Only the inputs configured as a program duration
input are displayed.
If Start condition PROFIBUS DP or Modbus is selected:
Start signal input Options
•None
• %0V DO 01
• %0V DO 02
• %0V DO 03
• %0V DO 04
• %0V DO 05
• %0V DO 06
• %0V DO 07
• %0V DO 08
Factory setting
None
Select the program start input.
Path: Menu/Setup/Sampling programs
Function Options Info