Endress+Hauser Liquistation CSF48 - Page 204

Diagnostics and troubleshooting Liquistation CSF48
204 Endress+Hauser
Start mode Immediate Field only populated for PrgPartStart, BasicPrgStart and
StdPrgStart:
--> The program start setting is displayed
- Immediate --> immediately
- Date/time --> after date/time
- Volume --> with a volume
- Event --> when an event occurs
- Interval --> after an interval
- Individual dates --> individual timetable
- Multiple date --> multiple dates
Start date 05.05.2010 Field only populated if Start mode = Date/Time:
--> The start date is displayed
Stop mode Program end The program stop setting is displayed
- Program end --> when the program ends
- Continuous --> continuous operation
- Bottles full --> when bottles are full
- Date/time --> after date/time
- Event --> when an event occurs
Stop date 06.05.2010 Field only populated if Program end = Date/Time:
--> The time the program was stopped is displayed
Start flow sum/unit 100 m³ Field only populated if Start mode = Volume:
--> The starting volume is displayed
Bottle number 1 The field is only populated for BasicSampling or
StdSampling:
--> The bottle which was filled with the sample is displayed
Sample nbr 2 Number of samples transferred to the current bottle
Sampling result Sampling Ok Sampling Ok --> sampling ok
Sampling nOk --> sampling failed
--> For detailed diagnostics messages, see the diagnostics
logbook
Running sample number 1 Running sample number in the current program
Flow sum since last
sampling
1For flow-paced and time/flow-paced sampling:
--> Flow since the last sampling
For all other types of sampling:
--> Display: 0
Entry Example Info