Proline Promass E 100 Modbus RS485 Technical data
Endress+Hauser 101
Concentration
Package Description
Concentration Calculation and outputting of fluid concentrations
The measured density is converted to the concentration of a substance of a binary
mixture using the "Concentration" application package:
• Choice of predefined fluids (e.g. various sugar solutions, acids, alkalis, salts,
ethanol etc.)
• Common or user-defined units (°Brix, °Plato, % mass, % volume, mol/l etc.) for
standard applications.
• Concentration calculation from user-defined tables.
The measured values are output via the digital and analog outputs of the device.
16.14 Accessories
Overview of accessories available for order → 80
16.15 Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number
from nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or
scan the 2D matrix code (QR code) on the nameplate
Standard documentation Brief Operating Instructions
Brief Operating Instructions for the sensor
Measuring device Documentation code
Proline Promass E KA01260D
Transmitter Brief Operating Instructions
Measuring device Documentation code
Proline Promass 100 KA01335D
Technical Information
Measuring device Documentation code
Proline Promass E 100 TI01351D
Description of Device Parameters
Measuring device Documentation code
Proline Promass 100 GP01035D
To Next Page
Loading...
