Endress+Hauser Proline Promass E 100 - Advanced Settings; Defining the Tag Name; Calculated Values

Proline Promass E 100 Modbus RS485 Commissioning
Endress+Hauser 57
10.4 Advanced settings
The Advanced setup menu with its submenus contains all parameters needed for specific
settings.
Navigation path
"Setup" menu → Advanced setup
Overview of the parameters and submenus in the "Advanced setup" menu taking the
example of the Web browser
Advanced setup
→
Enter access code
Device tag
→  57
Calculated values
→  57
Sensor adjustment
→  58
Totalizer 1 to 3
→  59
10.4.1 Defining the tag name
To enable quick identification of the measuring point within the system, you can enter a
unique designation using the Device tag parameter and thus change the factory setting.
Navigation path
Setup → Advanced setup → Device tag
Parameter overview with brief description
Parameter Description
Selection/
User entry
Factory setting
Device tag Enter the name for the
measuring point.
Max. 32 characters, such
as letters, numbers or
special characters (e.g. @,
%, /)
Promass
The number of characters displayed depends on the characters used.
For information on the tag name in the "FieldCare" operating tool →  43
10.4.2 Calculated values
The Calculated values submenu contains parameters for calculating the corrected volume
flow.
Navigation path
"Setup" menu → Advanced setup → Calculated values
Structure of the submenu
Calculated values
→
Corrected volume flow calculation
External reference density
Fixed reference density
Reference temperature