Endress+Hauser Proline Promass E 100 - Transmitter Nameplate; Sensor Nameplate

Proline Promass E 100 Modbus RS485 Incoming acceptance and product identification
Endress+Hauser 13
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The "Additional standard documentation on the device"→  7 and "Supplementary
device-dependent documentation"→  7 sections
• The W@M Device Viewer: enter the serial number from the nameplate
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations App: Enter the serial number from the nameplate or
scan the 2-D matrix code (QR code) on the nameplate.
4.2.1 Transmitter nameplate
i
1
2
3
4
5
6
7
8
9
101112
Order code:
Ext. ord. cd.:
Ser. no.:
13
A0030222
 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Permitted ambient temperature (T
a
)
8 Degree of protection
9 2-D matrix code
10 Document number of safety-related supplementary documentation →  102
11 Manufacturing date: year-month
12 CE mark, C-Tick
13 Firmware version (FW)
4.2.2 Sensor nameplate
Order code:
Ser. no.:
Ext. ord. cd.:
1
6
7
8
2
3
5
4
A0029206
 3 Example of a sensor nameplate, part 1
1 Name of the sensor
2 Manufacturing location
3 Nominal diameter of the sensor; flange nominal diameter/nominal pressure; sensor test pressure; medium
temperature range; material of measuring tube and manifold
4 Sensor-specific information
5 CE mark, C-Tick
6 Order code
7 Serial number (ser. no.)
8 Extended order code (Ext. ord. cd.)