Endress+Hauser Proline Promass E 100 - 16.11 Human Interface

Proline Promass E 100 Modbus RS485 Technical data
Endress+Hauser 97
Process connections
• Flanges according to EN 1092-1 (DIN2501) / according to ASME B 16.5 / as per JIS
B2220:
Stainless steel, 1.4404 (F316/F316L)
• All other process connections:
Stainless steel, 1.4404 (316/316L)
Available process connections→  97
Seals
Welded process connections without internal seals
Accessories
Protective cover
Stainless steel, 1.4404 (316L)
Safety Barrier Promass 100
Housing: Polyamide
Process connections • Fixed flange connections:
• EN 1092-1 (DIN 2501) flange
• EN 1092-1 (DIN 2512N) flange
• Namur lengths in accordance with NE 132
• ASME B16.5 flange
• JIS B2220 flange
• DIN 11864-2 Form A flange, DIN 11866 series A, flange with notch
• Clamp connections:
Tri-Clamp (OD tubes), DIN 11866 series C
• Thread:
• DIN 11851 thread, DIN 11866 series A
• SMS 1145 thread
• ISO 2853 thread, ISO 2037
• DIN 11864-1 Form A thread, DIN 11866 series A
• VCO connections:
• 8-VCO-4
• 12-VCO-4
Process connection materials →  95
Surface roughness All data relate to parts in contact with fluid. The following surface roughness quality can
be ordered.
• Not polished
• Ra
max
= 0.76 µm (30 µin)
• Ra
max
= 0.38 µm (15 µin)
16.11 Human interface
Service interface Via service interface (CDI)