Do you have a question about the Endress+Hauser Proline Promass F 500 and is the answer not in the manual?
Device Type | Coriolis mass flowmeter |
---|---|
Measurement principle | Coriolis |
Transmitter housing | Aluminum or stainless steel |
Housing Material | Aluminum or stainless steel |
Protection Class | IP66/67 |
Measuring accuracy | ±0.1% of rate |
Process pressure | Up to 400 bar (up to 5800 psi) |
Display | Graphic display |
Output | 4-20 mA HART |
Power supply | 24 V DC |
Approvals | ATEX, IECEx, FM, CSA |
Communication | HART, PROFIBUS DP |
Wetted materials | Stainless steel |