Endress+Hauser Proline Promass F 500 - Connecting the Operating Tool

Operation options Proline Promass F 500 Modbus RS485
84 Endress+Hauser
8.5.1 Connecting the operating tool
Via Modbus RS485 protocol
This communication interface is available in device versions with a Modbus-RS485 output.
1 2
3
A0029437
 29 Options for remote operation via Modbus-RS485 protocol (active)
1 Control system (e.g. PLC)
2 Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or with
operating tool (e.g. FieldCare, DeviceCare) with COM DTM "CDI Communication TCP/IP" or Modbus DTM
3 Transmitter
Service interface
Via service interface (CDI-RJ45)
Proline 500 – digital transmitter
open
press
1
2
3
A0029163
 30 Connection via service interface (CDI-RJ45)
1 Computer with Web browser (e.g. Microsoft Internet Explorer, Microsoft Edge) for accessing the integrated
device Web server or with "FieldCare", "DeviceCare" operating tool with COM DTM "CDI Communication TCP/IP"
or Modbus DTM
2 Standard Ethernet connecting cable with RJ45 connector
3 Service interface (CDI-RJ45) of the measuring device with access to the integrated Web server