Endress+Hauser Proline Promass F 500 - Configuring the Local Display

Proline Promass F 500 Modbus RS485 Commissioning
Endress+Hauser 117
Parameter Description Selection / User interface /
User entry
Factory setting
Failure mode Define output behavior in alarm condition. • Actual value
• No pulses
No pulses
Invert output signal Invert the output signal. • No
• Yes
No
* Visibility depends on order options or device settings
10.3.12 Configuring the local display
The Display wizard guides you systematically through all the parameters that can
configured for configuring the local display.
Navigation
"Setup" menu → Display
‣
Display
Format display
→  118
Value 1 display
→  118
0% bargraph value 1
→  118
100% bargraph value 1
→  118
Value 2 display
→  119
Value 3 display
→  119
0% bargraph value 3
→  119
100% bargraph value 3
→  119
Value 4 display
→  119