Endress+Hauser Proline Promass F 500 - Accessories; Device-Specific Accessories

Accessories Proline Promass F 500 Modbus RS485
178 Endress+Hauser
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Transmitter
• Proline 500
• Proline 500 – digital
Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output
• Input
• Display / operation
• Housing
• Software

For details, see Installation Instructions EA01150
For details
• Proline 500 – digital transmitter: Installation Instructions EA01151
• Proline 500 transmitter: Installation Instructions EA01152

Proline 500 transmitter for replacement: the serial number of the current
transmitter should always be quoted when ordering. On the basis of the
serial number, the device-specific data of the replacement device can also be
used for the new transmitter.
WLAN antenna
Wide range
External WLAN antenna for a range of up to 50 m (165 ft).

Further information on the WLAN interface →  85.
Post mounting kit Post mounting kit for transmitter.

The post mounting kit can only be ordered together with a transmitter.
Protective cover
Proline 500
Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.

For details, see Installation Instructions EA01160
Display guard
Proline 500 – digital
Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.

For details, see Installation Instructions EA01161
Connecting cable
Proline 500 – digital
Sensor –
Transmitter
The following cable lengths are available: order code for "Cable, sensor connection"
• Option B: 20 m (65 ft)
• Option E: User configurable up to max. 50 m
• Option F: User configurable up to max. 165 ft

Maximum possible cable length for a Proline 500 – digital connecting cable:
300 m (1 000 ft)
Connecting cable
Proline 500
Sensor –
Transmitter
The following cable lengths are available: order code for "Cable, sensor connection"
• Option 1: 5 m (16 ft)
• Option 2: 10 m (32 ft)
• Option 3: 20 m (65 ft)

Possible cable length for a Proline 500 connecting cable: max. 20 m (65 ft)