Endress+Hauser Proline Promass F 500 - Page 140

Commissioning Proline Promass F 500 Modbus RS485
140 Endress+Hauser
4. Setting the write protection (WP) switch on the main electronics module to the ON
position enables hardware write protection.
 In the Locking status parameter the Hardware locked option is displayed
→  141. In addition, on the local display the -symbol appears in front of the
parameters in the header of the operational display and in the navigation view.
X X X X X X XX X
20.50
XX
XX
A0029425
5. Setting the write protection (WP) switch on the main electronics module to the OFF
position (factory setting) disables hardware write protection.
 No option is displayed in the Locking status parameter →  141. On the local
display, the -symbol disappears from in front of the parameters in the header
of the operational display and in the navigation view.
Proline 500
1.
On
Off
1
2
3
4
A0029630
Setting the write protection (WP) switch on the main electronics module to the ON
position enables hardware write protection.
 In the Locking status parameter the Hardware locked option is displayed
→  141. In addition, on the local display the -symbol appears in front of the
parameters in the header of the operational display and in the navigation view.
X X X X X X XX X
20.50
XX
XX
A0029425
2. Setting the write protection (WP) switch on the main electronics module to the OFF
position (factory setting) disables hardware write protection.
 No option is displayed in the Locking status parameter →  141. On the local
display, the -symbol disappears from in front of the parameters in the header
of the operational display and in the navigation view.