Endress+Hauser Proline Promass F 500 - Page 68

Operation options Proline Promass F 500 Modbus RS485
68 Endress+Hauser
8.3.2 Navigation view
In the submenu In the wizard
4
2
1
3
5
/../Operation
0091-1
Access stat.disp
Operator
Locking status
Display
A0013993-EN
4
2
1
5
3
/../Select medium
Select medium
Liquid
A0013995-EN
1
2
3
4
5
Navigation view
Navigation path to current position
Status area
Display area for navigation
Operating elements →  71
Navigation path
The navigation path - displayed at the top left in the navigation view - consists of the
following elements:
• In the submenu:
Display symbol for menu
• In the wizard:
Display symbol for wizard
Omission symbol for
operating menu levels in
between
Name of current
• Submenu
• Wizard
• Parameters
↓ ↓ ↓
Examples / ../ Display
/ ../ Display
For more information about the icons in the menu, refer to the "Display area" section
→  69
Status area
The following appears in the status area of the navigation view in the top right corner:
• In the submenu
– The direct access code for the parameter you are navigating to (e.g. 0022-1)
– If a diagnostic event is present, the diagnostic behavior and status signal
• In the wizard
If a diagnostic event is present, the diagnostic behavior and status signal
• For information on the diagnostic behavior and status signal →  158
• For information on the function and entry of the direct access code →  74