Endress+Hauser Proline Promass F 500 - Page 79

Proline Promass F 500 Modbus RS485 Operation options
Endress+Hauser 79
Computer software
Software Interface
CDI-RJ45 WLAN
Recommended operating
systems
• Microsoft Windows 7 or higher.
• Mobile operating systems:
– iOS
– Android

Microsoft Windows XP is supported.
Web browsers supported • Microsoft Internet Explorer 8 or higher
• Microsoft Edge
• Mozilla Firefox
• Google Chrome
• Safari
Computer settings
Settings Interface
CDI-RJ45 WLAN
User rights Appropriate user rights (e.g. administrator rights) for TCP/IP and proxy server
settings are necessary (for adjusting the IP address, subnet mask etc.).
Proxy server settings of the
Web browser
The Web browser setting Use a Proxy Server for Your LAN must be
deselected .
JavaScript JavaScript must be enabled.

If JavaScript cannot be enabled:
enter http://192.168.1.212/basic.html in the address line of the Web
browser. A fully functional but simplified version of the operating menu
structure starts in the Web browser.

When installing a new firmware version: To enable correct data display,
clear the temporary memory (cache) of the Web browser under Internet
options.
Network connections Only the active network connections to the measuring device should be used.
Switch off all other network
connections such as WLAN.
Switch off all other network
connections.
In the event of connection problems: →  153
Measuring device
Device Interface
CDI-RJ45 WLAN
Measuring device The measuring device has an RJ45
interface.
The measuring device has a WLAN
antenna:
• Transmitter with integrated WLAN
antenna
• Transmitter with external WLAN
antenna
Web server Web server must be enabled;
factory setting: ON

For information on enabling
the Web server →  83
Web server and WLAN must be enabled;
factory setting: ON

For information on enabling the
Web server →  83