Endress+Hauser Proline Prosonic Flow 93T Portable - Page 70

Description of Device Functions Proline Prosonic Flow 93T Portable
70 Endress+Hauser
Function group ADDITIONAL CONFIGURATION
Functional description
MEASURED VARIABLES  SYSTEM UNITS  ADDITIONAL CONFIGURATION
UNIT TEMPERATURE
(0422)
Use this function to select the unit for displaying the fluid temperature.
Options
°C (Celsius)
K (Kelvin)
°F (Fahrenheit)
R (Rankine)
Factory setting
° C
!
Note!
The fluid temperature is entered in the function TEMPERATURE ( ä 107).
UNIT VISCOSITY
(0423)
Use this function to select the unit for liquid viscosity.
Options
mm
2
/s
cSt
St
Factory setting
mm
2
/s
UNIT LENGTH
(0424)
Use this function to select the unit for the measure of length.
The unit you select here is valid for:
• Nominal diameter
•Diameter
• Wall thickness
• Liner thickness
• Path length
• Wire length
• Sensor spacing
Options
MILLIMETER
INCH
Factory setting
MILLIMETER
UNIT VELOCITY
(0425)
Use this function to select the unit for displaying the velocity.
The unit you select here is valid for:
•Sound velocity
• Flow velocity
Options
mm
2
/s
cSt
St
Factory setting
m/s
FORMAT DATE/TIME
(0429)
Use this function to select the date and time format of the calibration history.
Options
DD.MM.YY 24 H
MM/DD/YY 12 H A/P
DD.MM.YY 12 H A/P
MM/DD/YY 24 H
Factory setting
DD.MM.YY 24 H