Energate FZ100C - 1 Introduction

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO,
USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. PRINTED COPIES WILL BE CONSIDERED UNCONTROLLED.
AW000873-G 7
1 Introduction
This document is intended for the use of installers who are installing the following Energate PCT thermostats that
support the ZigBee Smart Energy protocol:
 FZ100 & FZ100C Foundation
 Z100 Pioneer 2
 Z100 Pioneer 1
This document describes the typical installation scenarios and provides advice for handling unusual situations. For a
description of how to operate the thermostat, see 1.1 Operating the Foundation Thermostat.
Some Foundation models offer additional features, such as the ability to collect electricity consumption information
from an optional meter data collector attached to your electricity meter. This guide specifies the Foundation models
that support them whenever these additional features are discussed.
Foundation model numbers are printed on the radio module on the back of the thermostat.
If you have questions that are not answered by this document, please contact Energate using the information provided
in 15 Energate Technical Support.