Need help?Do you have a question about the EnGenius M36 and is the answer not in the manual?
General| Modulation | 16-QAM, 64-QAM, CCK, DBPSK, DQPSK, QPSK |
|---|---|
| Frequency band | 2.4 - 2.484 GHz |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 108 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Networking features | Fast Ethernet |
| Wireless technology | 802.11b/g/n |
| Compliance industry standards | IEEE 802.3a/f |
| Supported data transfer rates | 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbit/s |
| Antenna gain level (max) | 4 dBi |
| Internal | No |
| Certification | FCC Part 15, ETSI 300/328/CE |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 802.1x RADIUS, SSID, WPA, WPA2 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Power requirements | 100 - 240 VDC ± 10％, 50/60 Hz |
| Flash memory | 8 MB |
| Internal memory | 32 MB |
| Processor model | Qualcomm Atheros AR2316 |
| Processor frequency | 180 MHz |
Weight and Dimensions| Weight | 280 g |
|---|---|
| Dimensions (WxDxH) | 120 x 120 x 50 mm |
Configures the M36 as a central connection point for wireless clients.
Enables WDS for extending wireless range by linking multiple access points.
Sets up the M36 to extend the coverage of an existing wireless network.
Configures the M36 to form a mesh network for robust connectivity.
Steps to manually set a static IP address on your computer.
Procedure to access the device's web-based configuration via a browser.
Selects the operational mode for the M36: AP, AP with WDS, Repeater, or Mesh.
Configures general wireless network parameters and profiles.
Configures wireless network parameters when the device is in Access Point mode.
Configures wireless network parameters when the device is in Repeater mode.
Configures wireless network parameters when the device is in Mesh mode.
Configure the device's IP address, subnet mask, and default gateway.
Set up administrative username and password for device access.
To Next Page
