15
Mode and then enable WDS Link Settings function.
4.2 Wireless Settings
4.2.1 Access Point Mode → Wireless Network
Wireless Mode
M5000 supports 802.11a/b/g wireless band.
Channel / Frequency
The channel availability is based on the country’s regulation.
Auto
Place a Check to enable Auto channel selection.
AP Detection
AP Detection can help to select a best channel by scan nearby area.
Current Profile
Configure up to four different SSIDs, it can help to divide group of clients to access
the network. Press Edit to configure the profile and place a Check to enable extra
SSID.
Profile Isolation
Restricted Client to communicate with different VID by Selecting the Radio button.
Auction: When you select 802.11a (5GHz) as your wireless mode, only the wireless client which
To Next Page
Loading...
Need help?
General
