17
4.2.2 Client Bridge Mode → Wireless Network
Wireless Mode
M5000 supports 802.11a wireless band.
SSID
Specify the SSID if known. SSID text box will be automatically fill in when select an AP
in the Site Survey.
Site Survey
Using Site Survey to scan nearby APs and then select the AP to establish the
connection.
Prefer BSSID
Specify the MAC address if known. Prefer BSSID text box will be automatically fill in
when select an AP in the Site Survey.
WDS Client
Place a Radio button to Enable / Disable WDS Client.
Apply / Cancel
Press Apply to apply the changes or Cancel to return previous settings.
Profile
After Site Survey, webpage will display all nearby area’s Access Point. Click the BSSID
if you would like to connect with it.
Wireless Security
Please refer to the Wireless Security section.
Refresh
Press Refresh to scan again.
Auction: If the Access Point is suppressed its owned SSID, SSID section will be blank, the SSID must be
To Next Page
Loading...
Need help?
General
