34
4.6 Wireless → WDS Link Settings
WDS Link Settings is used to establish a connection between Access Points but the device is not
losing Access Point function. AP has WDS function can extend the wireless coverage and allow LANs
to communicate each other.
MAC Address
Enter the Access Point’s MAC address that you would like to extend the wireless
area.
Mode
Select Disable or Enable from the drop down list.
Apply / Cancel
Press Apply to apply the changes or Cancel to return previous settings.
Auction: The Access Point that you would like to extend the wireless area must enter your Access
Point’s MAC address. Not all Access Point supports this feature.
To Next Page
Loading...
