71
10 VLAN CONFIGURATION GUIDE
Following procedures are used to configure VLAN on EnGenius product. EnGenius product
supports both wireless and wired tagging on your network. Wireless tagging can help you to divide
the permission for different group of users. Wireless Clients associated with SSID1-4 will not have the
authority to manage the device when you enable the Profile Isolation except the Wireless VLAN ID is
the same as Management VLAN ID. Enable Profile Isolation will also restrict the communication
between wireless clients with different group of Wireless VLAN ID. Management VLAN (Wired) is
used to manage your device if the computer has authorized VLAN ID.
Following are VLAN configuration procedures:
Connect a PC to EnGenius product to LAN port with an IP address like 192.168.1.100 / 255.255.255.0
which is located within same subnet of EnGenius product LAN port IP address and then open any
popular WEB browser at http://192.168.1.1.
1. Enter admin for both default Username and Password or enter your own Username and Password.
To Next Page
Loading...
Need help?
General
