33
4.5 Wireless → Wireless MAC Filter
Wireless MAC Filters is used to Allow or Deny wireless clients, by their MAC addresses, accessing the
Network. You can manually add a MAC address to restrict the permission to access M5000. The
default setting is Disable Wireless MAC Filters.
0.
ACL Mode
ACL Mode can help to deny or allow certain Client to access the network. Select
Disable, Deny MAC in the list or Allow MAC in the list from the drop down list.
MAC Address Filter
Specify the MAC address manually.
Add
Press Add to add the MAC address in the table.
Apply
Press Apply to apply the changes.
To Next Page
Loading...
Need help?
General
