8
2 M5000 Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode with WDS Function, M5000 function likes a central connection for any
stations or clients that support IEEE 802.11a network. Stations and Client must configure the same
SSID and Security Password to associate within the range. M5000 supports 4 different SSIDs to
separate different clients at the same time.
2.2 Access Point with WDS Function
M5000 also supports WDS function in Access Point Mode without losing AP’s capabilities. Configure
others Access Point’s Wireless MAC Address in both Access Point devices to enlarge the wireless area
by enabling WDS Link Settings. WDS function can support up to 8 different AP’s MAC addresses.
Auction: Not every Access Point device has support WDS in Access Point Mode. It is recommended
using M5000 if you would like to use this service.
To Next Page
Loading...
