Initial Operation Installation and Operation Manual - COMTEC
®
/
OXITEC
®
DustEx
4 Doc.-ID: COM_OXI_Dust_11022020
3.6 Status LEDs 3.7 Softkey Symbols
Alarm, - orange - is lit when an
alarm has been activated (e.g.
limit alarm)
Moves the selection one position upwards
Moves the selection one position down-
wards
Maint. - Orange - a function
has been accessed which may
affect the measurement
Leave an area
Abort a function or entry
Error - red - is lit when a
system error has occurred
Select or confirm a function/value
3.8 System Code
Info
The system code on delivery is 0000. In this state, entry into the system is granted without having to
enter the system code. The system code protects the system from unauthorized use. Functions which
may alter the measurement of O
2
are therefore also protected.
If the system code has been altered, it must be kept in a safe place!
To Next Page
Loading...
