Enotec COMTEC 6000 DustEx - Menu Overview and Explanations; Menu Overview - SYS-MENU

Installation and Operation Manual - DustEx Menu Overview and Explanations
Doc.-ID: COM_OXI_Dust_11022020 5
4 Menu Overview and Explanations
4.1 Menu Overview - SYS-MENU
SYS-MENU
System Information
Actual measured values
O
2
measured value (% O
2
) {may be ppm}
O
2
-mA output 17A/B (mA)
O
2
sensor input (mV)
COe measured value (ppm or mg/m
3
)
COe mA output (mA)
COe sensor input (mV)
Flow rate reference air (l/h)
O
2
probe temperature (°C / °F)
O
2
probe heater power (%)
Thermocouple input (mV)
COe sensor temperature
COe heater power (mW)
COe heater resistance (Ω)
COe heater voltage (mV)
COe heater current (mA)
Terminal temperature (°C / °F)
Internal temperature (°C / °F)
O
2
sensor life (%)
Calibration results
e.g. 2012-04-20 (Choose date/time)
Executed at
Calibration method
O
2
sensor calibration
COe sensor calibration
~~ Calibration results ~~
O
2
value at test air (20,95 % O
2
)
♦ calibrated to (% O
2
)
O
2
value at test gas (% O
2
)
♦ calibrated to (% O
2
)
COe value at test air (0 ppm COe)
♦ calibrated to
COe value at test gas (ppm COe)
♦ calibrated to
~~ Calibration data ~~
O
2
sensor offset (mV)
O
2
sensor slope (mV / dec)
COe sensor offset (mV)
COe factor beta