Enotec COMTEC 6000 DustEx - Page 26

Menu Overview and Explanations Installation and Operation Manual - COMTEC
®
/ OXITEC
®
DustEx
6 Doc.-ID: COM_OXI_Dust_11022020
Calibration results (cont.)
~~ Test gas data ~~
Test air (20,95 % O
2
)
Test air (0 ppm CO)
Test gas (e.g. 2,1 % O
2
)
Test gas (e.g. 1000 ppm CO)
~~ Sensor raw data~~
O
2
voltage at test air (mV)
O
2
voltage at test gas (mV)
O
2
response to test gas (s)
O
2
sensor life
COe voltage at test air (mV)
COe voltage at test gas (mV)
Device operating data
Powers on counter
Hours in operation
Min. internal temperature
Max. internal temperature
Software version and options
Software COMTEC 6000
~~ Options ~~
♦ .....
SYS-MENU
System configuration
O
2
Measuring ranges
Meas.range 1 from (% O
2
)
Meas.range 1 to (% O
2
)
Meas.range 2 from (% O
2
)
Meas.range 2 to (% O
2
)
Meas.range select by (dig.input / keypad)
Meas.value averaging for (s)
Conversion wet → dry (% H
2
O)
mA output type (0-20 mA / 4-20 mA)
mA output on system error (mA)