1-3
1.4.
Safety precautions
Safety for customers, machine attendants, and service technicians is paramount in the design and
continuing development of the
FLEX
. Read this manual carefully, and follow all of the safety rules
that it provides.
Warning!
Never use an extension cord to supply power to the
FLEX
. The
FLEX
must be plugged into a proper receptacle. If you do not have the
correct receptacle or if it is damaged, notify store personnel.
Warning!
Never service the electrical components while they are powered on.
Always follow the technical data when servicing the electrical
components.
Warning!
Mechanical components in the
FLEX
weigh up to 400 pounds.
Always use lifting devices to remove or replace components.
Warning!
To prevent accidental operation that can cause serious injury, only
one person at a time is permitted to work on or near the
FLEX
during
testing or maintenance.
Warning!
Always remove the keys from the machine when you are done with
service. If untrained people open the machine, they could be
seriously injured.
Warning!
Do not reach into the In-Feed unit while the machine is in operation. If
you must reach into the machine, open the top door first. Opening a
door activates the safety interlock, which stops all moving parts.
To Next Page
Loading...
