2-1
Chapter 2
Specifications
2.1.
General Specifications
FLEX is Envipco’s series of high speed reverse vending machines. There are three main configurations:
FLEX DUAL (ALUMINUM & PET), FLEX TRI (ALUMINUM, PET & GLASS) and flex hds.
2.1.1.
Serial Label
The configuration of a FLEX is listed on its serial label. The serial label is located on the left side of the
cabinet. Figure 2-1 is an example of a serial label. It is a label for a FLEX DUAL Machine.
FIGURE 2-1.Example Serial Label
FLEX model numbers follow this scheme:
•
••
• FLEX DFF – Can and Plastic Machine with Flattener
•
••
• FLEX DFF/GSD – Can and Plastic Machine with Flattener / Glass Soft Drop
•
••
• FLEX HDS – Can and Plastic Machine with Flattener
2.1.2.
FLEX Configurations
There are three main configurations of the FLEX: FLEX DUAL, FLEX TRI and FLEX HDS. FLEX DUAL is a
low volume RVM that is compliant with the Americans with Disabilities Act (ADA). Figure 2-2 shows
the overall configuration of the FLEX DUAL. The FLEX TRI adds a side cabinet to our FLEX DUAL that
will accept GLASS containers. FLEX HDS is a high capacity machine that accepts both cans and plastic
bottles.
To Next Page
Loading...